Publication

Selected and complete peer-reviewed output of the CMMC group. Names of CMMC members are shown in bold. Last updated: October 2026 (source: Scopus).

Featured Publications

Journal Articles

2025

1. A new method for fabricating porous monetite via phase transformation of porous calcium sulfate for bone graft applications
   Imaniyyah, A.G., Herda, E., Cahyanto, A., Pangesty, A.I., Sunarso
   Ceramics International (2025) · DOI: 10.1016/j.ceramint.2025.08.205Biomaterials & Biomedical
2. Carbothermic reduction of ilmenite using non-carbonized biomass from palm kernel shell
   Attaurrazaq, B., Harjanto, S., Ulum, R.M., Setiawan, A., Kawigraha, A.
   Case Studies in Chemical and Environmental Engineering (2025) · DOI: 10.1016/j.cscee.2025.101119Extractive Metallurgy & Resource Recovery
3. EFFECT OF SULFURIC ACID TREATMENT IN CELLULOSE NANOCRYSTALS EXTRACTION FROM Sargassum sp. SEAWEED
   Fransiska, D., Hastiana, S., Boy Rahardjo Sidartha, B., Pangesty, A.I., Chalid, M., Priadi, D., Ausias, G., Irianto, H.E.
   Jurnal Pengolahan Hasil Perikanan Indonesia (2025) · DOI: 10.17844/y5x3as39Functional, Energy & Sustainable Materials
4. Fabrication of a microheater based on silver-polyimide metallization with enhanced thermal and mechanical stability
   Haryadi, D., Istiyanto, J., Suryawan, B., Pangesty, A.I., Supriadi, S., Charmet, J., Whulanza, Y.
   Results in Engineering (2025) · DOI: 10.1016/j.rineng.2025.104468Functional, Energy & Sustainable Materials
5. Film characteristics and electrochemical behavior of hydrothermally synthesized hydroxyapatite/polyacrylic acid composite coatings on WE43 magnesium alloy
   Erryani, A., Rokhmanto, F., Setyawan, A.D.H., Thaha, Y.N., Zakiyuddin, A., Kartika, I., Harjanto, S.
   Physica Scripta (2025) · DOI: 10.1088/1402-4896/ade575Biomaterials & Biomedical
6. Grafting Modification of Cellulose Nanofibril with 2-(N,N-Dimethylamino) Ethyl Methacrylate and 2-Hydroxyethyl Methacrylate as a Barrier-Improved Coating for Paper-Based Food Packaging
   Nizardo, N.M., Saffanah, A.N., Salsabila, A.F., Putri, A.A., Handayani, A.S., Intan Pangesty, A., Chalid, M.
   Journal of Renewable Materials (2025) · DOI: 10.32604/jrm.2025.02024-0068Functional, Energy & Sustainable Materials
7. Injectable Alginate-Collagen Hydrogel with Propolis: A Potential Cardioprotective Biomaterial
   Pangesty, A.I., Kamila, R.A., Schlumbergerina, A.C.P.B., Faizurrizqi, M.D., Fakhri, R.W., Sunarso, S., Zakaria, M.N., Nuraini, L., Azwani, W.
   International Journal of Technology (2025) · DOI: 10.14716/ijtech.v16i3.7366Biomaterials & Biomedical
8. Integrated Computational Materials Engineering of Fire-Resistant Steels
   Zargaran, A., Listyawan, T.A., Verma, S.K., Kim, J.H., Dudo, J., Niu, C., Saboo, A., Gong, J., Yang, H., Kim, K.
   Materials and Design (2025) · DOI: 10.1016/j.matdes.2025.113721Alloy Design & ICME
9. Isolation of Crystalline Microcellulose Fibers Based on Sorghum (Sorghum bicolor) Stalks for Biomedical Applications
   Fransiska, D., Fernando, Priadi, D., Irianto, H.E., Pangesty, A.I., Chalid, M.
   Malaysian Journal of Medicine and Health Sciences (2025) · DOI: 10.47836/mjmhs.21.s8.11Biomaterials & Biomedical
10. Isothermal Reduction and Nitridation Kinetics of Ilmenite Using Non-carbonized Palm Kernel Shell Biomass
    Attaurrazaq, B., Harjanto, S., Ulum, R.M., Setiawan, A.
    Journal of Sustainable Metallurgy (2025) · DOI: 10.1007/s40831-025-01072-9Extractive Metallurgy & Resource Recovery
11. Lateritic Ore Reduction Using Ammonia Gas as an Alternative to Reduce CO2 Emission in Ferronickel Production
    Pintowantoro, S., Soenredi, M.G., Aryaseta, D., Harjanto, S., Fahrurrozi, M., Ardian, F., Setiyorini, Y., Ananda, M.B., Abdul, F.
    Arabian Journal for Science and Engineering (2025) · DOI: 10.1007/s13369-025-10539-6Extractive Metallurgy & Resource Recovery
12. Physical–Chemical Characterisation and Cytotoxicity Study of Hydrogel-Based Composite Polyvinyl Alcohol, Gelatine and Human Amniotic Membrane Scaffold for Cardiac Patch Tissue Engineering
    Katili, P.A., Azwani, W., Arofah, G., Oktavya, G., Istiqomah, R.N., Tiurma, Y.M., Rahman, S.F., Pangesty, A.I., Sunarso, Whulanza, Y., Nugraha, B.
    International Journal of Biomaterials (2025) · DOI: 10.1155/ijbm/1544586Biomaterials & Biomedical
13. Preparation and characterization of sugar palm (Arenga pinnata) starch grafted with oligo(lactic acid) via ex situ oligomerization
    Triwulandari, E., Pangesty, A.I., Ghozali, M., Ilyas, R.A., Nizardo, N.M., Chalid, M.
    International Journal of Biological Macromolecules (2025) · DOI: 10.1016/j.ijbiomac.2025.145841Functional, Energy & Sustainable Materials
14. Rethinking Resources: The Critical Role of Recycling in the Mining Industry
    Whulanza, Y., Kusrini, E., Yuwono, A.H., Harjanto, S., Sofyan, N.
    International Journal of Technology (2025) · DOI: 10.14716/ijtech.v16i1.7605Extractive Metallurgy & Resource Recovery

2024

1. A novel method to fabricate monetite granules for bone graft applications
   Sunarso, Rahmawati, D., Irawan, B., Pangesty, A.I.
   Dental Materials Journal (2024) · DOI: 10.4012/dmj.2023-133Biomaterials & Biomedical
2. Characteristics of Treated Monazite in Different Particle Sizes to Upgrade the Rare Earth Elements Content by Using Mechanochemical and Roasting Processes
   Tjhia, M.A., Yahya, M.N.F., Ulum, R.M.
   International Journal of Technology (2024) · DOI: 10.14716/IJTECH.V15I2.6722Extractive Metallurgy & Resource Recovery
3. Effect of graphite, graphene oxide, and multi-walled carbon nanotubes on the physicochemical characteristics and biocompatibility of chitosan/hyaluronic acid/hydroxyapatite scaffolds for tissue engineering applications
   Rahman, S.F., Ghiffary, M.M., Tampubolon, J.Y., Yulianti, E.S., Nadhif, M.H., Katili, P.A., Hanafiah, S., Pangesty, A.I., Maras, M.A.J.
   Journal of Science: Advanced Materials and Devices (2024) · DOI: 10.1016/j.jsamd.2024.100719Biomaterials & Biomedical
4. Extraction and Characterization of Micro-fibrillated Cellulose from Rice Husk Waste for Biomedical Purposes
   Nurhayati, Irianto, H.E., Riastuti, R., Pangesty, A.I., Nugraha, A.F., Todo, M., Jumahat, A., Chalid, M.
   International Journal of Technology (2024) · DOI: 10.14716/ijtech.v15i2.6698Biomaterials & Biomedical
5. Formation and growth of metallic iron microparticle during carbothermic reduction of red mud with palm kernel shell charcoal
   Setiawan, A., Kawigraha, A., Attaurrazaq, B., Nahar, S., Permatasari, N.V., Haryanto, I., Ikhwani, N., Harjanto, S., Rhamdhani, M.A.
   Case Studies in Chemical and Environmental Engineering (2024) · DOI: 10.1016/j.cscee.2024.100939Extractive Metallurgy & Resource Recovery
6. High-Performance, Easy-to-Fabricate, Nanocomposite Heater for Life Sciences and Biomedical Applications
   Whulanza, Y., Ammar, H., Haryadi, D., Pangesty, A.I., Widoretno, W., Subekti, D.T., Charmet, J.
   Polymers (2024) · DOI: 10.3390/polym16081164Functional, Energy & Sustainable Materials
7. Modification of hydrothermally synthesized α-Fe2O3 nanorods with g-C3N4 prepared from various precursors as photoanodes for hydrogen production
   Ibadurrohman, M., Ainin, A.Q., Alam, F.Z., Mumtazah, N., Slamet, N., Ferdiansyah Madsuha, A., Ulum, R.M., Hasiholan, B.
   New Journal of Chemistry (2024) · DOI: 10.1039/d3nj05421gFunctional, Energy & Sustainable Materials
8. Physical and Chemical Characterization of Collagen/Alginate/Poly(Vinyl Alcohol) Scaffold with the Addition of Multi-Walled Carbon Nanotube, Reduced Graphene Oxide, Titanium Dioxide, and Zinc Oxide Materials
   Fajarani, R., Rahman, S.F., Pangesty, A.I., Katili, P.A., Park, D.-H., Basari
   International Journal of Technology (2024) · DOI: 10.14716/ijtech.v15i2.6693Biomaterials & Biomedical
9. PVA/gelatin hydrogel loaded with propolis for the treatment of myocardial infarction
   Pangesty, A.I., Dwinovandi, C.S., Sunarso, Tarigan, S.J.A.P., Rahman, S.F., Katili, P.A., Azwani, W., Whulanza, Y., Abdullah, A.H.
   Journal of Science: Advanced Materials and Devices (2024) · DOI: 10.1016/j.jsamd.2024.100732Biomaterials & Biomedical
10. Revisiting precipitates in Al-Cu-Li alloys: Experiments and first-principles calculations of thermodynamic stability of Al2CuLi(T1) precipitate
    Agustianingrum, M.P., Verma, S.K., Petschke, D., Lotter, F., Staab, T.E.M., Tang, S., Cao, L., Zulfikar, N., Cho, H., Listyawan, T.A., Kim, H., Jung, C., Kim, S.-H., Zargaran, A., Kim, K.
    Journal of Alloys and Compounds (2024) · DOI: 10.1016/j.jallcom.2024.174495Alloy Design & ICME
11. Synthesis and optimization of Ni/Mo-impregnated kaolin-based ZSM-5 as a catalytic hydrocracking catalyst for heavy petroleum distillates
    Dhaneswara, D., Fatriansyah, J.F., Sudiro, T., Harjanto, S., Mastuli, M.S., Federico, A., Ulfiati, R.
    Sustainable Energy and Fuels (2024) · DOI: 10.1039/d3se01573dFunctional, Energy & Sustainable Materials
12. The Effect of Sodium Dodecyl Benzene Sulphonate Addition in Carbon Nanotube-Based Nanofluid Quenchant for Carbon Steel Heat Treatment
    Putra, W.N., Ariati, M., Suharno, B., Harjanto, S., Ramahdita, G.
    Evergreen (2024) Heat Treatment & Quenching

2023

1. Compressive Strength of Newly Developed Nonsintered Hydroxyapatite Blocks for Bone Graft Applications
   Sunarso, S., Suryadi, A., Indrani, D.J., Pangesty, A.I.
   European Journal of Dentistry (2023) · DOI: 10.1055/s-0043-1774327Biomaterials & Biomedical
2. Effect of hydrothermal temperature on phase transformation and mechanical property of non-sintered hydroxyapatite and its in vitro solubility
   Sunarso, Rino, Qalbina, T., Indrani, D.J., Herda, E., Pangesty, A.I.
   Journal of the Korean Ceramic Society (2023) · DOI: 10.1007/s43207-022-00257-2Biomaterials & Biomedical
3. Effect of PEG Incorporation on Physicochemical and in vitro Degradation of PLLA/PDLLA Blends: Application in Biodegradable Implants
   Chalid, M., Gustiraharjo, G., Pangesty, A.I., Adyandra, A., Whulanza, Y., Supriadi, S.
   Journal of Renewable Materials (2023) · DOI: 10.32604/jrm.2023.026788Biomaterials & Biomedical
4. Effects of Printing Parameters on the Mechanical Strength of Thermoplastics 3D Printed Specimens
   Mazlan, M.A., Mustar, M.F., Abdullah, A.H., Zakaria, N.A.C., Hashim, N.M., Pangesty, A.I.
   Journal of Mechanical Engineering (2023) · DOI: 10.24191/JMECHE.V12I1.24640Functional, Energy & Sustainable Materials
5. Measurement of gas holdup characteristics in two-phase column flotation by electrical capacitance volume tomography
   Nugraha, H., Haryono, D., Harjanto, S., Huda, M.A., Taruno, W.P.
   Physica Scripta (2023) · DOI: 10.1088/1402-4896/ad008aExtractive Metallurgy & Resource Recovery
6. Microstructure Evolution and Phase Transformation of Iron Produced from the Sustainable Carbothermic Reduction Process of High-Pressure Acid Leaching Residue
   Setiawan, A., Harjanto, S., Kawigraha, A., Ikhwani, N., Rhamdhani, M.A.
   ACS Omega (2023) · DOI: 10.1021/acsomega.3c05574Extractive Metallurgy & Resource Recovery
7. Pyro-Hydrometallurgy Routes to Recover Silica from Indonesian Ferronickel Slag
   Ulum, R.M., Natalin, Riastuti, R., Mayangsari, W., Prasetyo, A.B., Soedarsono, J.W., Maksum, A.
   Recycling (2023) · DOI: 10.3390/recycling8010013Extractive Metallurgy & Resource Recovery
8. The Effect of Umbilical Cord Blood Serum and Platelet-Rich Plasma Coatings on the Characteristics of Poly(ε-caprolactone) Scaffolds for Skin Tissue Engineering Applications
   Nurhayati, R.W., Laksono, A.L., Salwa, A., Pangesty, A.I., Whulanza, Y., Mubarok, W.
   International Journal of Technology (2023) · DOI: 10.14716/ijtech.v14i7.6709Biomaterials & Biomedical

2022

1. Development of Ankle-Foot Orthosis with the Integration of IoTController
   Wahid, A.M.A., Tardan, G., Pangesty, A.I., Rashid, H., Abdullah, A.H.
   International Journal of Emerging Technology and Advanced Engineering (2022) · DOI: 10.46338/ijetae0522_06Biomaterials & Biomedical
2. Effect of 10, 20, 30, 40 wt% MgO addition on Ferronickel Slag Roasting to Produce Raw Materials for Refractory
   Utomo, M.H.R., Ulum, R.M., Prasetyo, A.B.
   Evergreen (2022) · DOI: 10.5109/4794182Extractive Metallurgy & Resource Recovery
3. Effect of hydrothermal treatment of titanium in high concentration of AgNO3 solution on surface morphology and roughness
   Sunarso, S., Putra, R.J.H., Theodorea, C.F., Pangesty, A.I.
   F1000Research (2022) · DOI: 10.12688/f1000research.79542.1Biomaterials & Biomedical
4. Improving high-temperature oxidation behavior by modifying Al and Co content in Al-Co-Cr-Fe-Ni high-entropy alloy
   Listyawan, T.A., Agustianingrum, M.P., Na, Y.S., Lim, K.R., Park, N.
   Journal of Materials Science and Technology (2022) · DOI: 10.1016/j.jmst.2022.04.028Alloy Design & ICME
5. Separation of Magnesium and Lithium from Brine Water and Bittern Using Sodium Silicate Precipitation Agent
   Sulistiyono, E., Harjanto, S., Lalasari, L.H.
   Resources (2022) · DOI: 10.3390/resources11100089Extractive Metallurgy & Resource Recovery
6. Synthesis and Characterization ZSM-5 Based on Kaolin as a Catalyst for Catalytic Cracking of Heavy Distillate
   Ulfiati, R., Dhaneswara, D., Harjanto, S., Fatriansyah, J.F.
   International Journal of Technology (2022) · DOI: 10.14716/ijtech.v13i4.5150Functional, Energy & Sustainable Materials
7. Volume Shrinkage during Carbothermic Reduction of Low-Grade Iron Ore Containing Goethite and Coal Composite
   Setiawan, A., Ermawati, I., Anggraini, F., Abidin, F., Hapid, A., Kawigraha, A., Harjanto, S., Rhamdhani, M.A.
   Sains Malaysiana (2022) · DOI: 10.17576/jsm-2022-5105-20Extractive Metallurgy & Resource Recovery

2021

1. Alginate modification and lectin-conjugation approach to synthesize the mucoadhesive matrix
   Putri, A.P., Picchioni, F., Harjanto, S., Chalid, M.
   Applied Sciences (Switzerland) (2021) · DOI: 10.3390/app112411818Biomaterials & Biomedical
2. Ball milling effect on corrosion and biocompatibility behavior of femnc alloys produced by powder metallurgy in simulated body fluids environment
   Syarif, J., Pratesa, Y., Prasetyo, Y., Harjanto, S.
   Metals (2021) · DOI: 10.3390/met11101597Biomaterials & Biomedical
3. Decomposition of ferronickel slag through alkali fusion in the roasting process
   Mayangsari, W., Avifah, I.N., Prasetyo, A.B., Febriana, E., Maksum, A., Ulum, R.M., Firdiyono, F., Subagja, R., Soedarsono, J.W.
   Eastern-European Journal of Enterprise Technologies (2021) · DOI: 10.15587/1729-4061.2021.217579Extractive Metallurgy & Resource Recovery
4. Effect of Adding Biomass from Palm Kernel Shell on Phase Transformation and Microstructure during Carbothermic Reduction of Ilmenite
   Lamandasa, C.I., Setiawan, A., Harjanto, S., Rhamdhani, M.A.
   International Journal of Technology (2021) · DOI: 10.14716/IJTECH.V12I6.5232Extractive Metallurgy & Resource Recovery
5. Enhancement of Energy-Harvesting Performance of Magneto-Mechano-Electric Generators through Optimization of the Interfacial Layer
   Kim, S.H., Thakre, A., Patil, D.R., Park, S.H., Listyawan, T.A., Park, N., Hwang, G.-T., Jang, J., Kim, K.-H., Ryu, J.
   ACS Applied Materials and Interfaces (2021) · DOI: 10.1021/acsami.1c00922Functional, Energy & Sustainable Materials
6. Gas holdup and bubble flow transition characteristics in column flotation process determined by capacitive signals measurement
   Harjanto, S., Haryono, D., Nugraha, H., Saputra, G., Baidillah, M.R., Al Huda, M., Taruno, W.P.
   Brazilian Journal of Chemical Engineering (2021) · DOI: 10.1007/s43153-021-00104-7Extractive Metallurgy & Resource Recovery
7. Improvement of mechanical strength of tissue engineering scaffold due to the temperature control of polymer blend solution
   Pangesty, A.I., Todo, M.
   Journal of Functional Biomaterials (2021) · DOI: 10.3390/jfb12030047Biomaterials & Biomedical
8. Kinetics and Mechanisms of Carbothermic Reduction of Weathered Ilmenite Using Palm Kernel Shell Biomass
   Setiawan, A., Rhamdhani, M.A., Pownceby, M.I., Webster, N.A.S., Harjanto, S.
   Journal of Sustainable Metallurgy (2021) · DOI: 10.1007/s40831-021-00457-wExtractive Metallurgy & Resource Recovery
9. Resilience and Adaptability for a Post-Pandemic World: Exploring Technology to Enhance Environmental Sustainability
   Sofyan, N., Yuwono, A.H., Harjanto, S., Budiyanto, M.A., Wulanza, Y., Putra, N., Kartohardjono, S., Kusrini, E., Berawi, M.A., Suwartha, N., Maknun, I.J., Yatmo, Y.A., Atmodiwirjo, P., Asvial, M., Harwahyu, R., Suryanegara, M., Setiawan, E.A., Zagloel, T.Y.M., Surjandari, I.
   International Journal of Technology (2021) · DOI: 10.14716/IJTECH.V12I6.5427Functional, Energy & Sustainable Materials
10. Study of vacancies in Fex(CoCrMnNi)100-x medium- and high-entropy alloys by positron annihilation spectroscopy
    Jodi, D.E., Listyawan, T.A., Hruska, P., Cizek, J., Park, N., Lee, U.
    Scripta Materialia (2021) · DOI: 10.1016/j.scriptamat.2020.113654Alloy Design & ICME
11. The effect of cold drawing process on the microstructure evolution of Ti-4.5Al-2.5Fe-0.15O titanium alloy
    Do, H., Kim, Y., Mawardi, F., Listyawan, T.A., Baek, E.R., Park, N.
    Materials Letters (2021) · DOI: 10.1016/j.matlet.2020.129219Alloy Design & ICME

2020

1. A new guide for improving mechanical properties of non-equiatomic FeCoCrMnNi medium- and high-entropy alloys with ultrasonic nanocrystal surface modification process
   Listyawan, T.A., Lee, H., Park, N.
   Journal of Materials Science and Technology (2020) · DOI: 10.1016/j.jmst.2020.04.039Alloy Design & ICME
2. Cooling rate observation in quenching process using carbon nanofluids for S45C carbon steel
   Riza, R.I., Putra, W.N., Harjanto, S.
   Key Engineering Materials (2020) · DOI: 10.4028/www.scientific.net/KEM.833.13Heat Treatment & Quenching
3. Degradation characteristics of mg-1,6gd alloy at low thickness reduction of warm rolling
   Hidayat, A.N.F., Zakiyuddin, A., Harjanto, S., Susanti, O.
   Materials Science Forum (2020) · DOI: 10.4028/www.scientific.net/MSF.1000.139Biomaterials & Biomedical
4. Degradation characteristics of porous Fe-Mn-C alloys obtained by sintering-dissolution process (SDP) for metallic bone scaffold
   Pratesa, Y., Larasati, A., Harjanto, S., Suharno, B., Ariati, M.
   Sains Malaysiana (2020) · DOI: 10.17576/jsm-2020-4903-19Biomaterials & Biomedical
5. Degradation characterization and mechanisms of warm rolled Mg-1.6Gd with 95% reduction ratio for biodegradable implant applications
   Zakiyuddin, A., Irawan, A.A., Susanti, O., Harjanto, S.
   Archives of Metallurgy and Materials (2020) · DOI: 10.24425/amm.2020.133209Biomaterials & Biomedical
6. Effect of temperature in carbothermic reduction of indonesian limonite ore using printed circuit boards as reducing agent
   Ulum, R.M., Wicaksana, A.K., Abidin, F.
   Materials Science Forum (2020) · DOI: 10.4028/www.scientific.net/MSF.1009.155Extractive Metallurgy & Resource Recovery
7. Effect of Zn Addition on Electrochemical Performance of Al–Air Battery
   Lee, H., Listyawan, T.A., Park, N., Kim, G., Chang, I.
   International Journal of Precision Engineering and Manufacturing – Green Technology (2020) · DOI: 10.1007/s40684-019-00136-yFunctional, Energy & Sustainable Materials
8. Effects of Infill Density on 3D Printed Socket for Transtibial Prosthetic Leg
   Fadzil, W.F.A.W., Mazlan, M.A., Abdullah, A.H., Hanapiah, F.A., Pangesty, A.I.
   Journal of Mechanical Engineering (2020) Biomaterials & Biomedical
9. Microstructure and mechanical properties of CoCrFeMnNi high entropy alloy with ultrasonic nanocrystal surface modification process
   Listyawan, T.A., Lee, H., Park, N., Lee, U.
   Journal of Materials Science and Technology (2020) · DOI: 10.1016/j.jmst.2020.02.083Alloy Design & ICME
10. Optimizing extraction and enrichment of lanthanide from indonesian low grade bauxite using sequential magnetic separation, acid leaching, and precipitation processes
    Kusrini, E., Trisko, N., Harjanto, S., Rahman, A., Usman, A.
    Engineering Journal (2020) · DOI: 10.4186/ej.2020.24.4.327Extractive Metallurgy & Resource Recovery
11. Optimizing performance of li4ti5o12 (Lto) by addition of sn microparticle in high loading as anode for lithium-ion batteries
    Priyono, B., Ulum, R.M., Syahrial, A.Z., Trixie, S., Jodi, H., Ramadhan, L.Z., Subhan, A.
    Materials Science Forum (2020) · DOI: 10.4028/www.scientific.net/MSF.1000.20Functional, Energy & Sustainable Materials
12. Preliminary study on gallium-based particle synthesis by ultrasonication for microfluid application
    Ulum, R.M., Putra, W.N., Hidayat, M.A.
    Materials Science Forum (2020) · DOI: 10.4028/www.scientific.net/MSF.1000.233Heat Treatment & Quenching
13. Solar Carbothermic Reduction of Ilmenite Using Palm Kernel Shell Biomass
    Setiawan, A., Shaw, M., Torpy, A., Pownceby, M.I., Harjanto, S., Rhamdhani, M.A.
    JOM (2020) · DOI: 10.1007/s11837-020-04297-zExtractive Metallurgy & Resource Recovery
14. Surface hardening treatment of Fe40(CoCrMnNi)60 medium entropy alloy via aerosol deposition technique: A new approach
    Listyawan, T.A., Kumar, A., Shin, W., Do, H., Lee, K.-H., Ryu, J., Park, N.
    Materials Letters (2020) · DOI: 10.1016/j.matlet.2020.127633Alloy Design & ICME
15. The effect of calcination temperature on metakaolin characteristic synthesized from badau belitung kaolin
    Ulfiati, R., Dhaneswara, D., Fatriansyah, J.F., Harjanto, S.
    Key Engineering Materials (2020) · DOI: 10.4028/www.scientific.net/KEM.841.312Functional, Energy & Sustainable Materials

2019

1. Application of carbamide as foaming agent of FE-MN-C alloy for degradable biomaterial candidate with powder metallurgy process
   Pratesa, Y., Suharno, B., Wardhana, A.C., Harjanto, S.
   Jurnal Teknologi (2019) · DOI: 10.11113/jt.v81.12578Biomaterials & Biomedical
2. Sulfides formation in carbothermic reduction of saprolitic nickel laterite ore using low-rank coals and additives: A thermodynamic simulation analysis
   Harjanto, S., Rhamdhani, M.A.
   Minerals (2019) · DOI: 10.3390/min9100631Extractive Metallurgy & Resource Recovery

2018

1. Development of cylindrical microfibrous scaffold using melt-spinning method for vascular tissue engineering
   Pangesty, A., Todo, M.
   Materials Letters (2018) · DOI: 10.1016/j.matlet.2018.06.046Biomaterials & Biomedical
2. Electrical capacitance volume tomography validation of column flotation process with gas injection variation
   Harjanto, S., Haryono, D., Faisal, H.E., Daniah, K., Nugraha, H., Al Huda, M., Taruno, W.P.
   Engineering Journal (2018) · DOI: 10.4186/ej.2018.22.1.215Extractive Metallurgy & Resource Recovery
3. Policy analysis on cadaveric kidney donation and transplantation
   Pangesty, A.I.
   Evergreen (2018) · DOI: 10.5109/1936216Biomaterials & Biomedical
4. Selective sulphidation of impurities in weathered ilmenite. Part 1 – Applicability to different ilmenite deposits and simulated Becher kiln conditions
   Rhamdhani, M.A., Ahmad, S., Pownceby, M.I., Bruckard, W.J., Harjanto, S.
   Minerals Engineering (2018) · DOI: 10.1016/j.mineng.2018.03.005Extractive Metallurgy & Resource Recovery
5. The hydrogen adsorption behavior of Mechano-Chemically activated carbon from Indonesian low-rank coal: Coupled Langmuir and Dubinin-Astakhov Isotherm model analysis
   Harjanto, S., Fatriansyah, J.F., Noviana, L.N., Yunior, S.W.
   International Journal of Technology (2018) · DOI: 10.14716/ijtech.v9i5.2031Functional, Energy & Sustainable Materials
6. The preparation of activated carbon from coconut shell charcoal by novel mechano-chemical activation
   Fatriansyah, J.F., Matari, T., Harjanto, S.
   Materials Science Forum (2018) · DOI: 10.4028/www.scientific.net/MSF.929.50Functional, Energy & Sustainable Materials

2017

1. Development and characterization of hybrid tubular structure of PLCL porous scaffold with hMSCs/ECs cell sheet
   Pangesty, A.I., Arahira, T., Todo, M.
   Journal of Materials Science: Materials in Medicine (2017) · DOI: 10.1007/s10856-017-5985-5Biomaterials & Biomedical
2. Effect of severe reduction on mechanical properties during hot rolling of Mg-1.6Gd alloys
   Susanti, O., Mochtar, M.A., Harjanto, S.
   Materials Research Express (2017) · DOI: 10.1088/2053-1591/aa6314Biomaterials & Biomedical
3. Preparation and characterization of porous tubular scaffold made of PCL/PLCL blends for vascular tissue engineering
   Pangesty, A., Todo, M.
   Journal of Mechanical Engineering (2017) Biomaterials & Biomedical

2016

1. Green and smart materials properties design and production for sustainable future
   Sofyan, N., Yuwono, A.H., Harjanto, S.
   International Journal of Technology (2016) · DOI: 10.14716/ijtech.v7i3.3285Functional, Energy & Sustainable Materials

Researcher Profiles